Reset OSPI flash and warm reset ... 
Reset OSPI flash and warm reset ... 

Starting OSPI Bootloader ... 

DMSC Firmware Version 11.0.7--v11.00.07 (Fancy Rat)
DMSC Firmware revision 0xb
DMSC ABI revision 4.0

Image number: 0, swrw: 0x01010000
Image number: 1, swrw: 0x01010000

########################################
[ABB]   Start application image number: 0
########################################

KPI_DATA: [BOOTLOADER_PROFILE] Boot Media       : NOR SPI FLASH 
KPI_DATA: [BOOTLOADER_PROFILE] Boot Media Clock : 133.333 MHz 
KPI_DATA: [BOOTLOADER_PROFILE] Boot Image Size  : 1871 KB 
KPI_DATA: [BOOTLOADER_PROFILE] Cores present    : 
m4f0-0
r5f1-0
r5f0-0
KPI_DATA: [BOOTLOADER PROFILE] SYSFW init                       :      22622us 
KPI_DATA: [BOOTLOADER PROFILE] System_init                      :      89084us 
KPI_DATA: [BOOTLOADER PROFILE] Drivers_open                     :       3007us 
KPI_DATA: [BOOTLOADER PROFILE] Board_driversOpen                :      16713us 
KPI_DATA: [BOOTLOADER PROFILE] Sciclient Get Version            :      19693us 
KPI_DATA: [BOOTLOADER PROFILE] CPU load                         :    1422021us 
KPI_DATA: [BOOTLOADER PROFILE] SBL End                          :          0us 
KPI_DATA: [BOOTLOADER_PROFILE] SBL Total Time Taken             :    1573145us 

Image loading done, switching to application ...
Storing parameters: OK
Restore remanent memory indicated, type: 1, instance: 0
Restore remanent memory indicated, type: 2, instance: 0
Free remanent memory indicated: 88008328 (skip)
Restore remanent memory indicated, type: 8, instance: 0
Restore remanent memory indicated, type: 9, instance: 0
Restore remanent memory indicated, type: 10, instance: 0
[APP] INFO: Initializing PRU instance ...
                                         DP83826E detected
TJA1101 detected
PRU_PHY_detect:152 Phy 0 alive
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 1
Module/submodule successfully plugged into slot 0, subslot 1
Module/submodule successfully plugged into slot 0, subslot 2
Module/submodule successfully plugged into slot 0, subslot 3
Module/submodule successfully plugged into slot 0, subslot 4
Restore remanent memory indicated, type: 3, instance: 0
Store remanent memory indicated, type: 1, instance: 0
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 1
Store remanent memory indicated, type: 3, instance: 0
Set Led request received on Led 3 to 1
Set Led request received on Led 2 to 0
Free remanent memory indicated: 8800c4d2 (skip)
Cyclic task...
Acyclic task...
Profinet startup ended!
Set Led request received on Led 3 to 1
Storing parameters: OK
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Storing parameters: OK
Set Led request received on Led 3 to 0
IP address = 192.168.10.16, Subnet mask = 255.255.255.0, Default router = 192.168.10.16
Connect_ind: AR = 1, AR type = 32, send clock factor = 32, Reduction ratio (in) = 32, reduction ratio (out) = 32, session key = 1281, host IP = 192.168.10.10
Callback called: PN_APP_IOD_cbArOwnershipInd, arNum: 1, numSub: 12
Module/submodule successfully plugged into slot 1, subslot 1
Module/submodule successfully plugged into slot 2, subslot 1
Module/submodule successfully plugged into slot 3, subslot 1
Module/submodule successfully plugged into slot 4, subslot 1
Module/submodule successfully plugged into slot 5, subslot 1
Module/submodule successfully plugged into slot 6, subslot 1
Module/submodule successfully plugged into slot 7, subslot 1
Module/submodule successfully plugged into slot 8, subslot 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Param_end for: API = 0, slot = 0, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32768, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32769, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32770, AR = 1, session key = 1281
Param_end for: API = 0, slot = 1, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 2, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 3, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 4, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 5, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 6, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 7, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 8, subslot = 1, AR = 1, session key = 1281
New IO controller Input Consumer Status (ICS) = 0x0 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 8, subslot 1
Ready for input update during startup: AR = 1
New IO controller Output Provider Status (OPS) = 0x0 in slot 1, subslot 1
AR in-data event indication received: AR = 1, session key = 1281
Set Led request received on Led 1 to 1
Callback called: PN_APP_IOD_cbArOwnershipInd, arNum: 1, numSub: 12
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Param_end for: API = 0, slot = 0, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32768, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32769, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32770, AR = 1, session key = 1281
Param_end for: API = 0, slot = 1, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 2, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 3, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 4, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 5, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 6, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 7, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 8, subslot = 1, AR = 1, session key = 1281
Ready for input update during submodule update: AR = 1
AR in-data event indication received: AR = 1, session key = 1281
New IO controller Output Provider Status (OPS) = 0x60 in slot 1, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 8, subslot 1
New IO controller Output Provider Status (OPS) = 0x80 in slot 1, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 8, subslot 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Connect_ind: AR = 2, AR type = 32, send clock factor = 32, Reduction ratio (in) = 32, reduction ratio (out) = 32, session key = 1282, host IP = 192.168.10.12
Callback called: PN_APP_IOD_cbArOwnershipInd, arNum: 2, numSub: 12
Ready for input update during startup: AR = 2
Set Led request received on Led 1 to 1

Reset OSPI flash and warm reset ... 
Reset OSPI flash and warm reset ... 

Starting OSPI Bootloader ... 

DMSC Firmware Version 11.0.7--v11.00.07 (Fancy Rat)
DMSC Firmware revision 0xb
DMSC ABI revision 4.0

Image number: 0, swrw: 0x01010000
Image number: 1, swrw: 0x01010000

########################################
[ABB]   Start application image number: 0
########################################

KPI_DATA: [BOOTLOADER_PROFILE] Boot Media       : NOR SPI FLASH 
KPI_DATA: [BOOTLOADER_PROFILE] Boot Media Clock : 133.333 MHz 
KPI_DATA: [BOOTLOADER_PROFILE] Boot Image Size  : 1871 KB 
KPI_DATA: [BOOTLOADER_PROFILE] Cores present    : 
m4f0-0
r5f1-0
r5f0-0
KPI_DATA: [BOOTLOADER PROFILE] SYSFW init                       :      22623us 
KPI_DATA: [BOOTLOADER PROFILE] System_init                      :      88985us 
KPI_DATA: [BOOTLOADER PROFILE] Drivers_open                     :       3020us 
KPI_DATA: [BOOTLOADER PROFILE] Board_driversOpen                :      16714us 
KPI_DATA: [BOOTLOADER PROFILE] Sciclient Get Version            :      19698us 
KPI_DATA: [BOOTLOADER PROFILE] CPU load                         :    1420451us 
KPI_DATA: [BOOTLOADER PROFILE] SBL End                          :          0us 
KPI_DATA: [BOOTLOADER_PROFILE] SBL Total Time Taken             :    1571495us 

Image loading done, switching to application ...
Storing parameters: OK
Restore remanent memory indicated, type: 1, instance: 0
Restore remanent memory indicated, type: 2, instance: 0
Free remanent memory indicated: 88008328 (skip)
Restore remanent memory indicated, type: 8, instance: 0
Restore remanent memory indicated, type: 9, instance: 0
Restore remanent memory indicated, type: 10, instance: 0
[APP] INFO: Initializing PRU instance ...
                                         DP83826E detected
TJA1101 detected
PRU_PHY_detect:152 Phy 0 alive
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 1
Module/submodule successfully plugged into slot 0, subslot 1
Module/submodule successfully plugged into slot 0, subslot 2
Module/submodule successfully plugged into slot 0, subslot 3
Module/submodule successfully plugged into slot 0, subslot 4
Restore remanent memory indicated, type: 3, instance: 0
Store remanent memory indicated, type: 1, instance: 0
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 1
Store remanent memory indicated, type: 3, instance: 0
Set Led request received on Led 3 to 1
Set Led request received on Led 2 to 0
Free remanent memory indicated: 8800c4d2 (skip)
Cyclic task...
Acyclic task...
Profinet startup ended!
Set Led request received on Led 3 to 1
Storing parameters: OK
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Storing parameters: OK
Set Led request received on Led 3 to 0
IP address = 192.168.10.16, Subnet mask = 255.255.255.0, Default router = 192.168.10.16
Connect_ind: AR = 1, AR type = 32, send clock factor = 32, Reduction ratio (in) = 32, reduction ratio (out) = 32, session key = 1281, host IP = 192.168.10.10
Callback called: PN_APP_IOD_cbArOwnershipInd, arNum: 1, numSub: 12
Module/submodule successfully plugged into slot 1, subslot 1
Module/submodule successfully plugged into slot 2, subslot 1
Module/submodule successfully plugged into slot 3, subslot 1
Module/submodule successfully plugged into slot 4, subslot 1
Module/submodule successfully plugged into slot 5, subslot 1
Module/submodule successfully plugged into slot 6, subslot 1
Module/submodule successfully plugged into slot 7, subslot 1
Module/submodule successfully plugged into slot 8, subslot 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Param_end for: API = 0, slot = 0, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32768, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32769, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32770, AR = 1, session key = 1281
Param_end for: API = 0, slot = 1, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 2, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 3, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 4, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 5, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 6, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 7, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 8, subslot = 1, AR = 1, session key = 1281
New IO controller Input Consumer Status (ICS) = 0x0 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 8, subslot 1
Ready for input update during startup: AR = 1
New IO controller Output Provider Status (OPS) = 0x60 in slot 1, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 8, subslot 1
AR in-data event indication received: AR = 1, session key = 1281
Set Led request received on Led 1 to 1
Callback called: PN_APP_IOD_cbArOwnershipInd, arNum: 1, numSub: 12
New IO controller Input Consumer Status (ICS) = 0x0 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x0 in slot 8, subslot 1
Set Led request received on Led 3 to 0
Param_end for: API = 0, slot = 0, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32768, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32769, AR = 1, session key = 1281
Param_end for: API = 0, slot = 0, subslot = 32770, AR = 1, session key = 1281
Param_end for: API = 0, slot = 1, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 2, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 3, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 4, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 5, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 6, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 7, subslot = 1, AR = 1, session key = 1281
Param_end for: API = 0, slot = 8, subslot = 1, AR = 1, session key = 1281
Set Led request received on Led 3 to 1
Ready for input update during submodule update: AR = 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x60 in slot 8, subslot 1
New IO controller Output Provider Status (OPS) = 0x80 in slot 1, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 2, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 3, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 4, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 5, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 6, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 7, subslot 1
New IO controller Input Consumer Status (ICS) = 0x80 in slot 8, subslot 1
New IO controller Output Provider Status (OPS) = 0x60 in slot 1, subslot 1
AR in-data event indication received: AR = 1, session key = 1281
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 1
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Set Led request received on Led 3 to 0
Connect_ind: AR = 2, AR type = 32, send clock factor = 32, Reduction ratio (in) = 32, reduction ratio (out) = 32, session key = 1282, host IP = 192.168.10.12
Callback called: PN_APP_IOD_cbArOwnershipInd, arNum: 2, numSub: 12
Ready for input update during startup: AR = 2
Set Led request received on Led 1 to 1
